Nebulizer
Introduction
This blog contains important information and
safety precautions for the
Compressor nebulizer. Before Using your
compressor nebulizer, please read and
Understand this complete blog. Save
this blog for future references.
1. Intended use
The medical air compressed nebulizer produces
5um-o.5um mist gas on the principle
of Venturi tube . it's developed
Tor the successful treatment of asthma, allergies and
other respiratory disorders. It makes a stream
of air and travels through clear tube to
the nebulizer. When air enters the
nebulizer, it'll convert
the prescribed medication
into aerosol mist for straightforward inhalation.
Medical Purpose
This product is meant to be used for
inhaling medication for asthma, allergies and
Other respiratory disorders.
Intended Users
• Legally certified doctors , like doctor,
nurse and therapist.
• Caregiver or patient under the guidance of
qualified doctors for
home treatment.
• The user should even be capable of
understanding general operation of BPL Breathe Ezee N3 and therefore the content
of instruction.
Intended Patients
This product shouldn't be employed by patients,
who are unconscious or aren't ready to
breathe on their own.
Environment
This product is meant to be used in
Hospital, clinic, and during a room or general
Household.
How nebulizers work?
The medical compressed nebulizer produces
5um-0.5um mist gas on the principle of venture tube. It makes a stream of air
and travels through clear tube to the nebulizer, when air enters the
nebulizer, it'll convert
the prescribed medication into aerosol mist for straightforward inhalation.
All
specifications of nebulizer
Parameters |
BPL
Breathe Ezee N3 |
Applied
voltage |
-220V/50Hz |
Power
consumption |
125VA |
weight |
1.30kg |
Size |
220*156*101 |
Atomizing
rate |
>0.2ml/min |
Noise |
<65dB(A) |
Flow Range |
>5.0L/min |
Particle
Size |
5-.05um |
Nebulizer maintenance and care
Cleaning,
disinfection and sterilization
Before performing any cleaning operation, cut and
unplug the unit.
Accessories for aerosol therapy and Nasal wash
• Cleaning Wash under the running water with
mild (non-abrasive) washing-up liquid,
After disassembling all the parts (except for
the connecting tube).lean the nozzle
After detaching it from the upper a part of the
nebulizer and disa5sembling as shown
In…..
• Disinfection: All accessories(except for the
connecting tube) are often disinfected or
Sterilized choosing one among these methods:
a) By soaking during a solution of water
and vinegar (60%water and 40% vinegar)
Finally, rinse thoroughly with beverage ,
b) By boiling in water for 20min, this
method can't
be used for masks. Use
Preferably distilled or demineralised water
• Drying: After washing or disinfecting all the
accessories, dry them very carefully with a
Paper tissue or also better yet, a warm air
flow.
Reassemble the nebulizer nozzle and it within the nebulizer
as indicated within
the
Assembly diagram
When used very frequently, we recommend that the
nebulizer get
replaced every 6
Months (or earlier if it becomes clogged), so as to ensure an
adequate hygienic
Level and therefore the maximum
therapeutic effect.
No comments:
Post a Comment